Neterion® X3100 Series
10 Gigabit Ethernet Network Adapters
Overview
Neterion continues to lead the industry in 10 Gigabit Ethernet solutions that enhance the productivity
and efficiency of data centers while slashing their costs and reducing complexity. While virtualization
and multi-core processors have provided IT managers with the capability to optimize their data
centers, Neterion’s X3100 Series adapters provide the means to fully utilize these advances.
With the X3100 Series, Neterion delivers its 3rd generation 10 Gigabit Ethernet controller,
providing easy access to new features that enable I/O Virtualization without compromise and
hardware offloads that significantly ease the demands on server CPU and memory resources.
I/O Virtualization without Compromise
The X3100 Series was designed to provide an optimum solution for I/O Virtualization. By offloading
many of the Hypervisor tasks from the host software to the adapter, virtualized applications can
achieve performance levels previously experienced only on servers running in non-virtualized or
native OS modes. With 17 independent bi-directional data paths, even I/O intensive applications
can realize the benefits of virtualization without compromising performance.
High Performance
Based on Neterion’s field proven, high performance ASIC architecture, the X3100 Series combines
state machines with flexible, embedded processor cores. The Neterion architecture combined
with a high-performance PCIe x8 interface, enables the X3100 Series to deliver full bi-directional
line rate throughput with very low latencies.
With Large Receive Offload (LRO), Neterion has defined an industry standard that delivers line
rate throughput while significantly reducing both CPU and memory utilization. The X3100 Series
sequences and aggregates received data in a way that makes it much more efficient to process.
LRO will reduce CPU utilization by up to 50% and enable optimized access to system memory.
This frees up system resources for use by applications rather than managing the I/O system.
Data Center Reliability
Designed for data center applications, the X3100 Series protects all internal and external
memories with single error correction, double error detection ECC. Also, the dual-port 10 GbE
network interfaces are designed for robustness with support for link aggregation and failover.
Easy Integration
The X3100 Series adapters allow end-users to preserve their existing investments in operating
systems, software applications, network administration tools and personnel training, while
dramatically increasing network performance by eliminating I/O bottlenecks. Network management
is greatly simplified, increasing both security and reliability while lowering the total cost of ownership.
The X3100 Series is fully compatible with the IEEE 802.3ae 10 Gigabit Ethernet standard. The
dual ports utilize industry-standard XAUI protocol and are interoperable with many different
physical layer technologies, including SR, LR, CX4, KX4, LRM, and 10GBase-T. This ensures the
X3100 Series will be compatible with your network infrastructure.
All Neterion products include full IPv4/IPv6 and comprehensive stateless offloads that preserve
the integrity of current TCP/IP implementations without "breaking the stack." Drivers are
available for all major operating systems.
Highlights
The X3100 Series is based on a powerful
architecture that combines the efficiency
of state machines with the flexibility of
embedded processor cores. Its protocol offload
and HA/RAS (High Availability/Reliability,
Availability and Serviceability) features provide
the highest performance and reliability.
- A high-performance PCIe x8 system interface,
combined with extensive protocol offloads
maximize host efficiencies by reducing host
processing loads and optimizing bus utilization.
- Dual ports with fully integrated IEEE 802.3ad link
aggregation/failover features are designed to meet
the demanding redundancy and high availability
requirements of critical data center applications.
- Hardware I/O Virtualization supports true single-root
and multi-root PCI-SIG I/O Virtualization. Virtual
machines (VM) within the server are provisioned
with up to 17 independent bi-directional dedicated
virtual Ethernet adapters each with guaranteed
isolation and independent reset.
- Neterion pioneered the development of Large
Receive Offload (LRO) which is now a widely
accepted industry standard available on the
X3100 Series.
- True QoS (Quality of Service) support for each
virtual path, allowing traffic to be classified,
prioritized, and queued at line rate.
- Turn-key driver support for all major Operating
Systems and server architectures (Custom driver
development is also available).
- "Carrier Grade" environmentals for power,
thermal, and noise characteristics.
Specifications
General
- 10 Gb Ethernet, dual port, PCIe x8 adapter
10 Gb Ethernet Interface
- Dual port support for active/active and active/passive
operation
- CX4 (and powered CX4) interfaces; single and dual port
- Supports single and dual port configurations -- SR, LR, LRM
TCP/UDP/IP Stateless Offloads
- Checksum offload (IPv4 and IPv6); TCP/UDP
- Large Send Offload (IPv4 and IPv6); TCP/UDP
- Large Receive Offload (IPv4 and IPv6) TCP/UDP
- Receive Side Scaling support
- Advanced packet classification and prioritization
I/O Virtualization Offloads
- Multiple modes of operation
- Supports 17 hardware-based independent data channels
- Supports PCI-SIG IOV specification:
- Single Root: v1.0
- Multi-Root: v0.7
Large Receive Offload
- Support for industry-standard LRO
Ethernet
- IEEE 802.3ae 10 Gb Ethernet
- IEEE 802.3ad Link Aggregation and Failover
- IEEE 802.3ak 10 GBASE-CX4
- IEEE 802.3an 10 GBASE-T
- IEEE 802.3D QoS Support
- IEEE 802.1Q VLAN Tag support
- IEEE 802.3X Pause Frame support
- Up to 512 unicast/multicast addresses
- Jumbo Frame support (up to 9622 Bytes)
- Wake-on-LAN (WOL)
PCI Express
- Compliant with PCIe 1.1 and compatible with PCIe 2.0
- Support for INTA, MSI and MSI-X
- Power management (PME) capabilities
- PXE support
Management
- MIB, MIB2, MIB2 Extensions, RMON, RMON2
Operating Systems
- Microsoft Windows® Server 2003 and Windows Server
2008
- Linux 2.4 and 2.6 - 32 bit and 64 bit
- VMware ESX 3.5, Solaris, FreeBSD, Apple MAC OS X, HP UX, SGI IRIX - support available
Physical Dimensions and Environmental
- Bus Type - PCIe
- Bus Width - x8
- Bus Speed - 2.5 Gb/s per lane per direction
- Power Consumption - 13w-17w
- Operating Temperature: 0 to 55°C
- Operating Humidity: 5 to 95%
- Length: 6.6" (Half Length)
- Height: 2.5" (Low Profile)
- RoHS-6 Compliant
Safety
EMC
- USA: FCC Part 15
- Canada: Class B ICES-003
| Product Configurations |
| Model Number |
Form Factor |
Ethernet Ports |
Host Bus |
| Neterion® X3110 CX4 |
Low Profile |
PCIe Single Port CX4 (powered) |
PCIe x8 |
| Neterion® X3120 CX4 |
Low Profile |
PCIe Dual Port CX4 (powered) |
PCIe x8 |
| Neterion® X3110 SR |
Low Profile |
PCIe Single Port SR |
PCIe x8 |
| Neterion® X3120 SR |
Low Profile |
PCIe Dual Port SR |
PCIe x8 |
| Neterion® X3110 LR |
Low Profile |
PCIe Single Port LR |
PCIe x8 |
| Neterion® X3120 LR |
Low Profile |
PCIe Dual Port LR |
PCIe x8 |
| Neterion® X3110 LRM |
Low Profile |
PCIe Single Port LR |
PCIe x8 |
| Neterion® X3120 LRM |
Low Profile |
PCIe Dual Port LR |
PCIe x8 |
| Neterion® X3110 BT |
Low Profile |
PCIe Single Port RJ45 (10G Base-T) |
PCIe x8 |
| Neterion® X3120 BT |
Low Profile |
PCIe Dual Port RJ45 (10G Base-T) |
PCIe x8 |
|
back to top
|
 |